Activating And Deactivating Bluetooth® Radio Interface; Assembling The Pole Pruner - Stihl HTA 135 Instruction Manual

Hide thumbs Also See for HTA 135:
Table of Contents

Advertisement

English
6.3
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
19.
There is a malfunction in the pole pruner or
battery.
7
Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
lights up blue for about 3 seconds. The
®
Bluetooth
radio interface on the battery is
activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
flashes blue for six times. The Blue‐
®
tooth
radio interface on the battery is deacti‐
vated.
8
Assembling the Pole Pru‐
ner
8.1

Assembling the Pole Pruner

► Switch off the pole pruner and remove the bat‐
tery.
2
b
► Remove the protective cap (1).
► Adjust the shaft length to a = 10 cm.
12
Radio
®
®
" LED next to the sym‐
®
" LED next to the sym‐
1
a
3
7 Activating and Deactivating Bluetooth® Radio Interface
► Mark b = 6 cm on the shaft (2).
90°
► Align the collet (4) and transmission (3) as
shown.
► Slide the transmission (3) onto the shaft (2) up
to mark b.
► Tighten down the screws (5) firmly.
®
6
7
®
► If you cannot push the transmission (3) onto
the shaft (2) up to mark b:
► Rotate the nut (7) counterclockwise until the
®
chain sprocket cover (6) can be removed.
► Remove the chain sprocket cover (6).
► Turn the chain sprocket (8) and push the
transmission (3) onto shaft (2) up to mark b.
► Fit the chain sprocket cover (6) so that it is
flush with the pole pruner.
► Fit the nut (7) and tighten it down firmly.
► Undo the screws (9).
► Pull out the protective tube (10).
4
90°
8
9
10
0458-698-0121-B
5
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents