Advertisement
Quick Links
PARTS INCLUDED
A
HARDWARE INCLUDED
11X
11X
TOOLS REQUIRED
#2 Phillips screwdriver
DISCLAIMER
•
Two people are recommended for the assembly of this product.
•
Use hardware provided and tools recommended to avoid any product faults.
•
Always assemble product on a clean soft surface to avoid scratching.
LH EXTENDED CORNER DESK SHELL
B
1X
9X
ASSEMBLY INSTRUCTIONS
C
D
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Belair LH
Summary of Contents for Belair LH
- Page 1 LH EXTENDED CORNER DESK SHELL ASSEMBLY INSTRUCTIONS PARTS INCLUDED HARDWARE INCLUDED TOOLS REQUIRED #2 Phillips screwdriver DISCLAIMER • Two people are recommended for the assembly of this product. • Use hardware provided and tools recommended to avoid any product faults.
- Page 2 LH EXTENDED CORNER DESK SHELL STEP 1 Attach desk back B and large right gable D as shown. Fasten pins and cams. STEP 2 Lay desk top A flat and lower back and large gable onto top. Do not fasten hardware until next step.
-
Page 3: Parts Included
RH EXTENDED CORNER DESK SHELL ASSEMBLY INSTRUCTIONS PARTS INCLUDED HARDWARE INCLUDED TOOLS REQUIRED #2 Phillips screwdriver DISCLAIMER • Two people are recommended for the assembly of this product. • Use hardware provided and tools recommended to avoid any product faults. •... - Page 4 RH EXTENDED CORNER DESK SHELL STEP 1 Attach desk back B and large left gable D as shown. Fasten pins and cams. STEP 2 Lay desk top A flat and lower back and large gable onto top. Do not fasten hardware until next step.
- Page 5 RETURN ASSEMBLY INSTRUCTIONS PARTS INCLUDED HARDWARE INCLUDED TOOLS REQUIRED #2 Phillips Screwdriver #2 Robertson DISCLAIMER • Two people are recommended for the assembly of this product. • Use hardware provided and tools recommended to avoid any product faults. • Always assemble product on a clean soft surface to avoid scratching.
- Page 6 RETURN STEP 1 Connect back B and gable C as shown. Fasten pins and cams. STEP 2 Lay top A upside down. Lower back and end onto top. Fasten pins and cams. STEP 3 Return unit right side up and use connecting flat brackets to attach return to adjacent unit.
- Page 7 HANGING PEDESTAL ASSEMBLY INSTRUCTIONS HARDWARE INCLUDED TOOLS REQUIRED #2 Robertson screwdriver DISCLAIMER • Two people are recommended for the assembly of this product. • Use hardware provided and tools recommended to avoid any product faults. • Always assemble product on a clean soft surface to avoid scratching.
- Page 8 HANGING PEDESTAL STEP 1 Remove drawers from pedestal shell. To do so the black catches on the drawer tracks need to be released in order to pull the drawers out. Pull drawers out as far as possible. Pull the left track catch up and press the right track catch down.
- Page 9 HANGING PEDESTAL STEP 4 Ensure ball bearings on tracks are towards the front. Slide drawers back onto tracks.
Need help?
Do you have a question about the LH and is the answer not in the manual?
Questions and answers