Storage - Siemens SIMOTICS XP Operating Instructions Manual

Preparations for use
4.5 Transport and storage
• Never remain under or in the immediate vicinity of the machine when it is lifted.
Note
When lifting the machines for transport, only lift them in a position that corresponds to their
basic construction type.
The type of construction of the machine is stated on the rating plate.
If any transport locks are in place, remove them before commissioning. Store the transport
locks or disable them. Use the transport locks when transporting the motors again or
reactivate the transport locks.
The machines are packed in different ways depending on how they are transported and their
size. If not otherwise contractually agreed, the packaging corresponds to the packing
guidelines according to ISPM (International Standards for Phytosanitary Measures).
Comply with the graphic symbols provided on the packaging. Their meaning is as follows:
This way
up
4.5.1

Storage

Storing outdoors
NOTICE
Damage to the motor
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden
and/or dusty, moist/humid atmospheres.
36
WARNING
Danger to life as a result of a machine falling
If the lifting gear or load handling attachments were to fail, the machine could fall. This
can result in death, serious injury or material damage.
• In order to gain easy and safe access to the underside of the machine, place it in a
secure and raised position.
Fragile
goods
Protect Protect
against against
moisture heat
Center of Hand hooks
gravity forbidden
1MB..5/6 shaft height 71 ... 355
Operating Instructions, 10/2021, A5E41926185A
Attach
here