Disposal Of Components - Siemens SIMOTICS XP Operating Instructions Manual

11.5

Disposal of components

Components
The machines consist mainly of steel and various proportions of copper and aluminum.
Metals are generally considered to be unlimitedly recyclable.
Sort the components for recycling according to whether they are:
• Iron and steel
• Aluminum
• Non-ferrous metal, e.g. windings
The winding insulation is incinerated during copper recycling.
• Insulating materials
• Cables and wires
• Electronic waste
Process materials and chemicals
Sort the process materials and chemicals for recycling according to whether they are for
example:
• Oil
• Grease
• Cleaning substances and solvents
• Paint residues
• Anti-corrosion agent
• Coolant additives such as inhibitors, antifreeze or biocides
Dispose of the separated components according to local regulations or via a specialist
disposal company. The same applies for cloths and cleaning substances which have been
used while working on the machine.
Packaging material
• If necessary, contact a suitable specialist disposal company.
• Wooden packaging for sea transport consists of impregnated wood. Observe the local
regulations.
• The foil used for water-proof packaging is an aluminum composite foil. It can be recycled
thermally. Dirty foil must be disposed of via waste incineration.
1MB..5/6 shaft height 71 ... 355
Operating Instructions, 10/2021, A5E41926185A
Disposal
11.5 Disposal of components
141