Toshiba M70 User Manual page 42

The Grand Tour
DC IN LED
Power LED
Battery LED
Hard Disk Drive LED
Multiple Digital
Media Card Slot
Access LED*
Multiple Digital
Media Card Slot*
Wireless
Communication
Switch*
Wireless
Communication
LED*
Microphone Jack
2-2
The DC IN LED indicates the computer is
connected to the AC adapter and it is plugged
into an AC power source.
In normal operating mode, the Power LED is
green or blue (depending on the model you
purchased). If the system is in Standby Mode the
LED will flash amber, while the LED will be off
when the computer is turned off or is in
Hibernation Mode.
The Battery LED indicates the battery's current
charge/discharge status. It lights green or blue
(depending on the model you purchased) when
the battery is fully charged. It lights amber while
the battery is being charged from the AC adapter.
It flashes amber when the battery capacity is low.
The Hard Disk Drive LED indicates that the hard
disk drive is being accessed. Every time your
computer runs a program, opens a file, or
performs some other function in which it must
access the hard disk drive, this light will go on.
The Multiple Digital Media Card Slot Access LED
lights up when the Multiple Digital Media Card is
accessed.
(The availability of this function depends on the
model you purchased.)
The Multiple Digital Media Card Slot allows you
to use media cards from digital still cameras and
various forms of portable information equipment.
(The availability of this function depends on the
model you purchased.)
The wireless communication switch turns on the
wireless networking transceiver. The Wireless
Communication LED beside it indicates that
wireless networking is turned on.
(The availability of this function depends on the
model you purchased.)
Indicates whether the wireless LAN is active or
not.
(The availability of this function depends on the
model you purchased.)
The standard 3.5 mm mini microphone jack
enables connection of a three conductive type
mini-jack for a monaural microphone.
User's Manual