Toshiba M70 User Manual page 119

Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
U
N
C
To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press F12 to enter the boot menu.
2. The boot select screen will be displayed: Hard Disk Drive, CD/DVD,
FDD, and LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want
and press Enter.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
USB
Legacy USB Support
Use this option to enable or disable legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and floppy disk drive by setting the Legacy USB Support option to enable.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
User's Manual
Selects the USB floppy disk drive.
Selects the Network.
Selects optical device.
Enables the Wake-up on Keyboard feature.
Disables the Wake-up on Keyboard function
(Default).
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
HW Setup
7-3