Toshiba M70 User Manual page 149

TV output signal
Problem
Display on TV is poor
No display
If you turn the computer off in Standby Mode while the display is on a TV,
the computer will select either the internal LCD or an external computer
CRT as the display device the next time it is switched on.
LAN
Problem
Cannot access LAN or
the Wake up on LAN
feature does not work
Standby/Hibernation
Problem
The system will not
enter Standby/
Hibernation
User's Manual
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN hub.
Make sure the AC adapter is connected.
You cannot access a LAN using the computer's
battery power.
If problems persist, consult your LAN
administrator.
Procedure
®
Is Windows Media Player open? The system
might not enter Standby/Hibernation, if
®
Windows Media Player is either playing a
selection or finished playing a selection. Close
®
Windows Media Player before you select
Standby/Hibernation.
If problems persist, contact your dealer.
Troubleshooting
The Keyboard.
9-11