On-Board Stainless Steel Tanks - Graco PR70 Instructions Manual

Parts

On-Board Stainless Steel Tanks

Tank Assemblies LC0237, LC0238,
LC0254, and LC0255
Right hand tank shown, left hand tank is mirror image.
304
3
302
2
Assembly LC0237 Shown
1
Use glass cloth tape to secure ground strap, thermal switch, and RTD to tank wall before adding heat blanket.
2
Secure heat blanket to tank with string laced through eyelets.
3
Insulation blanket should cover heat blanket completely. Secure insulation blanket to tank with 2 in. wide velcro
strap.
4
The RTD sensor assembly (308) should always be connected to side one of the M8 splitter harness (306). Side
one is on the female/female end of connector and is marked with a molded imprint of the number "1". The RTD
sensor assembly (305) should always be connected to side two of the M8 splitter harness (306).
36
304a
303
1
307
308
305
1 4
306
4
309
301
ti12451a
4
312394C