Often a trip involves several course changes, requiring a series of route points (waypoints) which you navigate to, one after another. The sequence of
waypoints leading to the ultimate destination is called a route. Your unit can automatically advance to the next waypoint on a route, so you do not have
to change the destination waypoint repeatedly. Up to 200 routes can be stored; a route may have 35 waypoints.
Press the [MENU] key.
1
Press the WAYPOINTS/ROUTES soft key.
2
Press the ROUTES soft key to open the ROUTE menu. (No data will be shown if
3
there are no routes entered.)
Press the NEW ROUTE soft key to open the new route entry screen.
4
If desired you can change the route name shown and/or add a comment. A
5
route name may consist of six characters; comment, 13 characters.
Press the LOCAL LIST or ALPHA LIST soft key to open the waypoint list.
6
Use the trackball to select a waypoint, then press the ADD WPT soft key to add
7
it to the route.
Repeat step 7 to complete the route.
8
Note: To clear last-entered waypoint, press the ERASE LST WP soft key. Each
press of this key deletes the last waypoint entered.