Entering A Waypoint By Range And Bearing - Furuno 1933C Manual

PLOTTER OPERATION
E n t e r i n g a W a y p o i n t b y R a
E n t e r i n g a W a y p o i n t b y R a
Press the [MENU] key to open
1
the menu.
Press the WAYPOINTS/ROUTES, WAYPOINTS, and WAYPOINT BY RNG &
2
BRG soft keys.
A red blinking appears at ownship position, and it is the origin point for range
X
3
and bearing.
Operate the trackball to place the cursor on the location desired. Range and
4
bearing from own ship to the cursor appear at the top of the display.
Note: The origin point of range and bearing can be shifted to the location
desired. Operate the trackball to select location; then press the START POINT
soft key.
n g e a n d B e a r i n g
n g e a n d B e a r i n g
(cont.)
43
2