Table of Contents
Advertisement
±45°
2
3
Fig. 47 Plume direction conditions
[1]
Opening in the building i.e. air brick, window.
[2]
Direction of the flue products, must be more than 45° from the
wall or structure.
[3]
Plume terminal.
[4]
At least 1,500mm from any opening in the building.
6
Inspection and spares
6.1
Inspection and maintenance
▶ An annual visual check of the flue system including the plume
management kit (if fitted) must be carried out in addition to the
checks stated in the appliance Installation and maintenance
Instructions.
NOTICE:
Painting
▶ Do not paint the plume management kit.
6.2
Spare parts
Replacement wall mounted horizontal flue components.
Terminal outlet
assembly
8 716 11 209 0
Flue screw pack
8 713 406 039 0
Air sample point plug -
Flue elbow (white)
8 716 11 253 0
Air sample point plug -
Flue elbow (silver)
8 7137 709 576
Connection joint seal -
102mm
8 716 111 673 0
Table 7 Spare parts list
Greenstar Condensfit II – 6 721 819 755 (2019/12)
4
1
Wall seal - inner
8 716 11 211 0
Collar - Flue elbow
8 716 11 254 0
Flue gas sample point
cap & seal - Flue elbow
(white)
8 716 11 252 0
Flue gas sample point
cap & seal - Flue elbow
(silver)
8 737 709 577
Connection joint seal -
62mm
8 711 004 367 0
Inspection and spares
19
Advertisement
Table of Contents
