Vax Power Plus 6 User Manual page 7

Operation
Removing Hose
When using cleaning tools, place cleaner handle in the upright position. The agitator
brush roll will not rotate when the cleaner is in the upright position. Also, turn cleaner
B
OFF before disconnecting and connecting hose to hose tube (A).
To use hose, lift hose end (B) as shown. When you are fi nished cleaning with the
tools, reposition hose end into tube.
A
Select Proper Tool
B
A
C
Attached Wand & Tools
A
B
Combination Tool (Upholstery & Dust Brush)
A
www.vax.com.au
A Combination tool (Upholstery/ dust brush) use with brush for carved
furniture, table tops, books, lamps, lighting fi xtures, venetian blinds,
baseboards, shutters, and registers. Remove brush to clean upholstered
furniture, draperies, mattresses, clothing, and carpeted stairs.
B
Turbo tool may be used for upholstered furniture, draperies, mattresses,
clothing, automobile interiors, and carpeted stairs.
C
Crevice tool may be used in tight spaces, corners and along edges
in such places as dresser drawers, upholstered furniture, stairs and
D
baseboards.
D
Extension wands are used to give extra length to your hose. Use them
with any of the above tools.
Attach tool or wand to the hose (A).
Attach tool to wand (B) by pushing it fi rmly onto the wand.
Twist wand or tool slightly to tighten or loosen the connection.
How to clean tools
To clean the hose and turbo tool, wipe off dirt with a cloth dampened in a mild
detergent. Rinse with a damp cloth. DO NOT submerge powered hand tool in water.
Cleaning tools may be washed in warm water with a detergent. Rinse and air dry
before using.
Slide brush to remove.
To replace brushes,
align bottom of brush
with grooves (A) on tool.
Slide brush into place.
Stair Cleaning
Use the hose and turbo tool for stair
cleaning. Clean from bottom to top.
CAUTION: To avoid personal injury
or unnecessary wear to carpet, and
to prevent the cleaner from falling, always
place it at bottom of stairs.
7