Table of Contents
Advertisement
Operation
Carton Contents
1
Handle section
2
Cleaner base and upper
housing assembly
3
Extension wands
4
Turbo tool
5
Crevice tool
6
Combination tool
(Upholstery/ dusting brush)
Remove all parts from carton and identify each
item shown.
Make sure all parts are located before disposing
of packing materials.
Attach handle
Using a Phillips screwdriver, remove screws from the top of the upper housing assembly.
Insert handle section into upper housing assembly. Push down fi rmly until you hear a click.
Fasten screws on either side of handle base.
Position tools
Place smaller diameter end of
wand (A) into bottom of rack.
B
Snap wand into clip at top.
Repeat with other wand.
C
Crevice tool (B) fi ts into one of
A
the extension wands.
Fit combination tool (C) into
storage area on side of cleaner
as shown.
4
1
4
3
5
AU: 1300 361 505 / NZ: 0800 800 900
2
6
Fit turbo tool (A) into recessed
A
area on front
of cleaner. Pivot toward handle
to snap in place.
Vax Service line
Advertisement
Table of Contents
