Table of Contents
Advertisement
LOADING AND UNLOADING THE CASSETTE
Loading a cassette
A charged battery pack must be installed on the
camcorder for cassette loading and unloading.
1
Press the
EJECT
button, the cassette holder will open.
2
Insert the cassette fully with the window facing
outwards.
3
Gently press on the indication
holder until it clicks into place.
1
2
3
Unloading the cassette
1
Press the
EJECT
button, the cassette holder will open.
2
Remove the cassette.
3
Gently press on the indication
holder until it clicks into place.
"PUSH"
on the cassette
"PUSH"
on the cassette
1 0
Erasure-prevention switch
To prevent accidental erasure of recorded material, use
the erasure-prevention switch, as described below.
A:
Recording is possible
B:
Recording is not possible
Before loading the cassette
Recorded cassettes or new cassettes tapes may be
loosely wound. Loose tape winding can be eliminated by
gently turning with a finger the left reel, see illustration, at
the bottom of the cassette.
�Notes:
• Do not cover the holes at the bottom of the cassette.
•Store the cassettes in their case, away from strong
light or heat sources, standing upright (vertical) to
prevent dust from entering, as well as uneven tape
winding.
(A)
(B)
Advertisement
Table of Contents
