Advertisement
Check the following before requesting service:
SYMPTOM
No power
No sound or sound weak
Sound distortion
BT not functioning
TROUBLESHOOTING:
POSSIBLE CAUSE
AC/DC Adaptor had not
connected
Volume of the unit was set to
minimum position
Volume level of
paired/connected device is in
low level
Volume level too high
Volume level of the
connected/paired device too
high
Unit not in BT mode
The external BT Device had
NOT paired to the unit
The external BT device too far
from the unit
19
POSSIBLE SOLUTION
Connected the AC/DC
Adaptor to the unit and
AC power as page 8
Increase the volume level
by turning the VOLUME
Control Knob on the unit
clockwise and press the
VOL + Button on the
Remote Control.
Rise the volume level of
the paired/connected
device
Reduce the volume level
by turning the VOLUME
Control Knob on the unit
counterclockwise and
press the VOL – Button on
the Remote Control
Reduce the volume level
of the connected/paired
device
Press the MODE Button on
the Unit or Remote
Control repeatedly until
bt
indicator "
" appear on
the display and blink to
enter to BT playback
mode
Pair the external BT
Device to the unit as page
12-13
Place the external BT
device close to the unit
Advertisement
