Advertisement
5.
Repeat Function:
During USD/SD Card playback, the default setting is all tracks repeat. "RE A" will
appear on the display. All the tracks will be playback repeatedly.
Press the Repeat Button on the Unit or RPT Button on the Remote Control. "RE 1" will
appear on the display. The current track will playback repeatedly.
NB: If you will not use the unit for an extended period of time, press the POWER
Switch to OFF position to power off the unit then unplug the AC/DC Adaptor from
AC wall outlet.
BT:
BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1.
Power on the unit as previously instructed.
2.
Press the MODE Button on the Unit or Remote Control repeatedly until indicator
bt
"
" appears on the display and blinks to enter to BT mode.
3.
Power on the external BT Device and enter to BT searching mode. Start pairing
following the on screen instructions from the external BT Device. When paired,
bt
the indicator "
4.
If pairing is complete you may now play music with your external BT Device.
5.
During playback:
Press the ►II/SCAN Button on the unit or Remote Control to pause, press
again to resume normal playback.
Press the I◄◄ or ►►I buttons on the unit or Remote Control repeatedly to
skip tracks.
Notes:
When the external BT Device has searched the unit, our model number "MHT890"
will appear on the display of external BT Device.
If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after pairing:
1.
Power on the external BT Device and enter to BT playback mode.
2.
Power on the unit and enter to BT mode as previously instructed. Indicator "bt"
" on the display will stop blinking.
12
Advertisement
