Troubleshooting - Magnavox MM451 Owner's Manual

TROUBLESHOOTING

In case of trouble with the unit, please look through the problems below and see if
you can solve them yourself before calling your dealer.
PROBLEM
Unit does not turn
ON when STANDBY
is pressed.
No sound comes
out of the
speakers.
The sound is
noisy.
The unit does not
act as expected,
or respond.
Cannot listen to
any station, or
signal appears
weak.
The sound is
distorted.
CD stops
immediately after
starting, or unit
pauses or stops
during play.
No sound.
Specific CD is
noisy, or playback
stops or skips.
Bluetooth No
Sound
CAUSE
• Unit is unplugged
• The external speakers are
disconnected.
• The volume is turned down
(to MIN).
• The input selector does not
match the playback source.
• The unit is too close to a TV
set or another similar
appliance.
• External factors such as
ESD (Electro-static
discharge) affect the unit.
• The station is not tuned-in
properly.
• A TV set is being used
nearby and is interfering
with the radio reception.
• The antenna is not
positioned properly.
• The antenna wire is
not fully extend.
• The CD is inserted upside
down.
• The CD is dusty or dirty or
there is condensation on
the CD.
• The CD player is paused.
• The CD is scratched,
damaged or warped.
• The disc is very dirty.
• Unit is not linked with your
Bluetooth enabled device.
• Unit placement out of range.
• Your Bluetooth enabled
device Volume set too low.
• Connect unit to AC power
supply
• Connect the external
speakers.
• Adjust the volume.
• Re-select the desired input
source.
• Turn off the TV or other
appliance, and relocate the
unit.
• Remove the power cord and
all power supply devices.
Then re-plug the unit after
one minute.
• Properly tune-in the desired
station.
• Turn-off the interfering TV
set.
• Re-position the antenna
until reception improves.
• Fully extend the antenna
wire.
• Insert the CD with the
printed side right-side up.
• Carefully clean and dry the
CD.
• Press the PLAY/PAUSE
button.
• The CD should be changed.
• Carefully clean the CD.
• Go through "Bluetooth Operations
process to link the speakers.
• Relocate the unit within Bluetooth
operating range (32 feet)
• Increase Volume level of your
Bluetooth enabled device.
11
SOLUTION