Table of Contents
Advertisement
Version 3.00 Feb. 2019
Section 7. Warnings
All EPSON TM series MICR settings follow the same hydra connection
settings as the master device EPSON TM series printer. Please read the
Section
7
of
"EPSON
OPOS
ADK
MANUAL/APPLICATION
DEVELOPMENT GUIDE/ POSPrinter (TM Series)" for further information.
Do not set the input and output buffers below the minimum 32 bytes.
The EPSON TM series MICR's EndInsertion method readies the printer to
receive a check and sets the printing position. This setting may take a time.
During this time, all devices connected by hydra settings are frozen. (For
example, the display marquee stops.)
During MICR mode (waiting receive a Check), using the Claim method on
any hydra devices (except the CashDrawer) will return an error.
When "Issue an Error Event for specified error occurrence during Check
insertion." radio button of "Error handling options during Check insertion
setting." in "Device Specific Setting" dialog box is marked, its operation is the
same as the previous versions of Ver. 2.30.
The
to
be
set
values
of
ResultCodeExtended
property,
namely, 'OPOS_EMICR_BADSIZE' and 'OPOS_EMICR_NODATA' are not
compatible with versions used prior to Ver. 2.30. In this case, the values
defined in UPOS Release 1.7 and subsequent releases are set.
When Ver. 2.30 overwrites a previous version, settings at "Error handling
options during Check insertion setting" are reset to "Issue an Error Event for
every error occurrence during Check insertion". If you wish to operate with
a previous version, resetting is required.
The setting items other than above, namely, "Automatic check remove on
read error", "Fire ErrorEvent on check digit parity error" and "Check font" are
succeeding the settings of the previous version.
ResultCodeExtended property values of printers and MICRs are sometimes
the same. However, please pay attention to the meaning of the error since
the
meaning
differs
by
combinations
of
ResultCode
and
ResultCodeExtended.
The error code differs by that timing when the power is turned OFF.
24
APPLICATION DEVELOPMENT GUIDE
MICR (EPSON TM Series)
Advertisement
Table of Contents
