Epson TM Series Development Manual page 25

Method Name
BeginRemoval OPOS_SUCCESS
OPOS_E_CLOSED
OPOS_E_NOTCLAIMED
OPOS_E_CLAIMED
OPOS_E_DISABLED
OPOS_E_BUSY
OPOS_E_OFFLINE
OPOS_E_TIMEOUT
OPOS_E_ILLEGAL
OPOS_E_FAILURE
EndRemoval OPOS_SUCCESS
OPOS_E_CLOSED
OPOS_E_NOTCLAIMED
OPOS_E_CLAIMED
OPOS_E_DISABLED
OPOS_E_BUSY
OPOS_E_FAILURE
OPOS_E_ILLEGAL
OPOS_E_EXTENDED
*1
The POSPrinter condition errors are as follows:
・OPOS_EPTR_COVER_OPEN
・OPOS_EPTR_JRN_EMPTY
・OPOS_EPTR_REC_EMPTY
・OPOS_EPTR_REC_CARTRIDGE_REMOVED
・OPOS_EPTR_REC_CARTRIDGE_EMPTY
・OPOS_EPTR_REC_HEAD_CLEANING
ResultCode
0
0
0
0
0
0
0
0
OPOS_EX_INVALIDMODE
OPOS_EX_BADPARAM+1
OPOS_EX_DEVBUSY
OPOS_EX_TIMEOUT
OPOS_EX_NOASB
0
OPOS_EX_MICRMODE
POSPrinter condition errors
0
0
0
0
0
0
OPOS_EPTR_MECHANICAL
OPOS_EPTR_CUTTER
OPOS_EPTR_UNRECOVERAB
LE
OPOS_EPTR_AUTORECOVER
ABLE
OPOS_EX_DEVBUSY
OPOS_EX_TIMEOUT
OPOS_EX_NOASB
OPOS_EMICR_CHECK
21
APPLICATION DEVELOPMENT GUIDE
MICR (EPSON TM Series)
Version 3.00 Feb. 2019
ResultCodeExtended
*1
Meaning
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Printer power is OFF.
Refer to UPOS Specifications.
Operation could not be completed
within the timeout period.
Illegal printer mode.
Data parameter does not comply.
Device was busy.
Output result is not returned within
timeout period.
Could not get ASB.
Refer to UPOS Specifications.
The port is locked by the
other device.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Printer power is OFF.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Refer to UPOS Specifications.
Device was busy.
Output result is not returned within
timeout period.
Could not get ASB.
A check is present in the device.