Table of Contents
Advertisement
(F9 load default is also set to ENABLE). Change the setting from [Enable]
to [Disable], and then press <F10> to save the setting and restart the sys-
tem. Likewise, the default value of Active LVDS is changed to DISABLE (F9
load default is also set to DISABLE)
Onboard LAN1
This allows you to enable or disable the Onboard LAN1 feature.
Onboard LAN2
This allows you to enable or disable the Onboard LAN2 feature.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Deep Sleep
Mobile platforms support Deep S4/S5 in DC only and desktop platforms
support Deep S4/S5 in AC only. The default value is [Disabled].
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the
power will remain off when the power recovers. If [Power On] is selected,
the system will start to boot up when the power recovers.
29
Advertisement
Table of Contents
