Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Touch the lower right conner of the front bezel with finger slightly then the function
2.
3.
4.
5.
6.
2-4
D185 Wide LCD Monitor User's Guide
key icon will light in blue.
Press
to open the main OSD menu.
Use
or
to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
then press
to select that function. Use
save.
Press
to move backwards through the sub-menus and exit from the OSD.
Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
Enables DDC/CI by default. Use OSD Exit Key, Press and hold the
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"or
"DDC/CI enable" shows on the screen.
to access that
or
to make adjustments. Press
for 10 seconds to unlock the OSD and
or
,
to
button for 10
Advertisement
Table of Contents
