Selecting A Supported Display Mode - Lenovo D185 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1366x768 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
640 x 480
700 x 570
640 x 350
720 x 400
800 x 600
1024 x 768
1360 x 768
1366x 768
Refresh rate
60 Hz 66Hz 72 Hz 75 Hz
50 Hz
70 Hz
70Hz
60 Hz 72Hz 75Hz
60Hz 70 Hz 75 Hz
60 Hz
60 Hz
2-7
Chapter 2.