Table of Contents
Advertisement
NLHome Connect
Basic setting
Remote start
Factory setting
1
Factory setting (may differ depending on the device type)
Change basic settings
Press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
aThe display shows H:xx
to give.
aThe display shows
to give.
Just as often on
3.
until the display shows the desired
setting.
Press or repeatedly until the display
4.
shows the desired value.
You can change multiple settings.
To save the settings, press . for
5.
about 3 seconds
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
40
Display text
Choise
rc:01
rc:00 - rc:02
1
re:
Start with
Busy-
reflected
to press
to press.
Description
Activate or deactivate remote
start.
The following settings are possible: †
With the setting "rc:00" the start
remotely deactivated
permanently.
†With the setting "rc:01" the start
can be selected remotely via the
remote start button.
"Remote start",
page 41
†With the setting "rc:02" the start
remotely activated
permanently.
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.
Home Connect
This device is network capable.
Connect your appliance to a mobile
terminal device to be able to operate
functions via the Home Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com. In
order to use Home Connect, you must
first establish a connection to the
WLAN home network (Wi-Fi
be configured with the Home Connect
app.
†→ †Device with WLAN home network
connect work (Wi-Fi), page 41
) and can
1
Advertisement
Table of Contents
