Table of Contents
Advertisement
NL Home Connect
Basic setting
Remote Start
Factory setting
Factory setting (may differ depending on the device type)
1
Change basic settings
on
to press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
a The display shows Hxx.
a The display shows
to give.
Just as often on
3.
until the display shows the desired setting
ling indicates.
Just as often on
4.
the display shows the desired
value.
You can change several settings.
To save the settings, approx.
5.
3 seconds on
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
36
Display text
Choise
rc1
rc0 - rc2
1
re
Start with
YES
Confirm
of
Busy-
reflected
to press
press to
to press.
Description
→
"Remote Start", Page 37 ac-
activate or deactivate.
The following settings are possible:
s With the setting "rc0", the function
permanently deactivated.
s With the setting "rc1", the func-
can be selected via the button
.
→
"Activate Remote Start",
Page 38
s With the setting "rc2", the function
permanently activated.
Reset changed settings
to the factory state.
The settings for the first
start-up must be specified.
Home Connect
This device is suitable for networks.
Connect your device to a mobile end
device to be able to operate
functions via the Home Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com. To
be able to use Home Connect, you must
first establish the connection to the
WLAN home network (Wi-Fi
configured with the Home Connect app.
s → " Device with WLAN home network
connect work (wifi)", Page 37
and can be
1)
Advertisement
Table of Contents
