Table of Contents
Advertisement
NLTroubleshooting
Malfunction
Crockery is not dry.
Plastic dishes are not
dry.
Cutlery is not dry.
50
Cause
Water remains in cavities
of crockery and cutlery
to stand.
The combined
detergent has poor
drying performance.
Extra dry for enhanced
drying is not activated.
Crockery has been removed
too early or the drying
process has not yet ended.
Used rinse aid has
limited drying
performance.
No mistake. Due to a lower
heat storage capacity
dries plastic worse.
Cutlery is not properly
placed in the cutlery basket
or drawer.
To fix an issue
▶
Arrange the crockery as diagonally as
possible.
Use rinse aid to improve
1.
drying performance.
Use another combination
2.
detergent with better drying
performance.
▶ Activate Extra Dry.
Wait for the program end.
1.
2.
Do not remove the dishes until 30
minutes after the end of the
programme.
Use a quality rinse aid.
▶
Eco products may have a
limited effect.
No solution available.
▶
Drops may form at the touch
points of the cutlery.
If possible, arrange the cutlery separately
1.
from each other.→Page 34
Avoid touch points.
2.
Advertisement
Table of Contents
