Table of Contents
Advertisement
Basic setting
Factory setting
1
Factory setting (may differ depending on the device type)
Change basic settings
Press.
1.
Approx. Press for 3 seconds to access
2.
the basic settings.
Press repeatedly until the display
3.
shows the desired setting.
Press or repeatedly until the display
4.
shows the desired value.
You can change multiple settings.
To save the settings, press . for
5.
about 3 seconds
Setting time
Approx. 3 seconds on
1.
to open the basic settings.
Press repeatedly until the display
2.
reads "Time setting".
Press or repeatedly until the display
3.
shows the desired time.
and longer pressed to
Through
hold, the setting values change in
10-minute increments.
To save the settings, press for
4.
approx. 3 seconds.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
Choice
Reset
to press.
to press
Description
Reset changed settings to factory
condition.
Initial commissioning settings must
be specified.
uncle Connect
huh
d this device is network capable.
Connect your appliance to a mobile
terminal device to be able to operate
functions via the Home Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com. In
order to use Home Connect, you must
first establish a connection to the
WLAN home network (Wi-Fi
be configured with the Home Connect
app.
†→ †Device with WLAN home network
connect work (wifi)", page 42 The
Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
Remark:Observe the safety
instructions in this manual and make
sure that they are also observed when
using the appliance.
Home Connect
) and can
1
41
NL
Advertisement
Table of Contents
