Table of Contents
Advertisement
9.4 Operation
9.4 Operation
9.4.1 EDID Data Inspection and Writing to the D-SUB Connector (Analog)
9.4.1 EDID Data Inspection and Writing to
1) Connect the EDID data writing unit.
1) Connect the EDID data writing unit.
2) Create a unique directory in the PC, and copy all the files of service tool (Ver. 3.40) into that directory.
2) Create a unique directory in the PC, and copy all the files of service tool (Ver. 3.40) into that directory.
3) Start the service tool with file [Service2.EXE].
3) Start the service tool with file [Service2.EXE].
4) When the screen as shown below appears, click the [LCD] button of [Monitor Type] and press the
4) When the screen as shown below appears, click the [LCD] button of [Monitor Type] and press the
[START] button.
[START] button.
the D-SUB Connector (Analog)
5-24 4
5-2
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiSync 20WGX2 and is the answer not in the manual?
Questions and answers