Techalogic XV-1 User Manual page 9

4. Turn on the camera's WIFI by pressing the ❹WIFI button TWICE. The blue WIFI light will
flash indicating that the camera's WIFI is turned on. If it is not connected to the phone's WIFI
within 1 minute, the camera's WIFI will automatically turn off. If the camera is connected to
the phone's WIFI, the blue light will remain solid (it will not be flashing).
Note: If you turn off the camera without turning off the camera's WIFI, the next time the
camera is turned on, the WIFI will automatically be on.
5. Long press the ❶power button 3 seconds to turn off the camera, and it will vibrate twice.
6. If the camera can't detect a memory card or if there's an error in reading the card, the camera
will vibrate 3 times and 2 lights will flash alternately as a warning.
Using the Remote Control
1. The controller is optional. The wireless design can be flexibly installed and used according to
your needs.
2. The camera and remote control will be automatically connected within 3 meters.