Operation - Techalogic XV-1 User Manual

Key buttons commands
1. To power on / off: Press and hold the ❶power button for 3 seconds, and the camera will
vibrate.
2. To start / stop recording: Short press the ❸recording button ONCE.
3. To turn the WIFI on / off: (First, stop recording.) Short press the ❹WIFI button TWICE.
4. To format the SD card: (First, stop recording and turn off the WIFI.) Quick short press the
❸recording button 5 times .
Note: If the camera can't detect or read the SD card, the 2 lights will flash alternately.
IMPORTANT: For 64GB / 128GB SD cards format it by pressing the key button 5 times.

Operation

Charging the Battery
1. Please charge the camera before use.
2. Please use the USB cable included to charge the camera.
3. While charging, the charging light (red light) will remain on, and it will automatically shut off at
full charge.
4. The camera can be used and will record whilst being charged
Note: Please don't use the USB port of computer to charge the camera.
Check the battery status
Short press once the ❸recording button to stop recording first, and press twice the ❶power
button to check the battery status:
Camera vibrates 3 times: battery power is more than 50%.
Camera vibrates twice: battery power 30%-50%.
Camera vibrates once: battery power is less than 30%.