Techalogic XV-1 User Manual page 8

Step 3
Using the Camera
1. Before use, make sure that the camera is fully charged, and the SD card is inserted.
Note: The SD card must be formatted when using it with the camera for the first time.
2. Long press and hold the ❶power button 3 seconds to turn on the camera, and it will vibrate
once.
3. Once the camera is turned on, the recording light (green light) remains on (meaning, it's not
recording), then it will automatically start recording. The green light will flash during recording.
To STOP recording, press the ❸recording button. The camera will vibrate once, and the
green light will remain on (not flashing). To START recording again, press the ❸recording
button and the camera will vibrate. The green light will start flashing indicating that the
camera is recording.