Techalogic XV-1 User Manual page 5

Note: If the battery reaches 0%, the camera will automatically turn off.
Intelligent Energy-Saving System
1. When the camera does not detect any motion for 3 minutes, it will automatically turn off.
2. When an external power supply is connected, the energy-saving system will be disabled.
3. This feature can be turned on/off in the APP's setting page.
Insert the Micro SD card
1. Open the cover of the SD card slot.
2. Insert a Class 10 or above Micro SD card and the Max. storage is 128G. Please make sure to
insert the SD card in the right direction and cover the card slot.
3. Don't remove the SD card while the camera is recording.
4. Please format the SD card when using it the first time. Format the SD card by quick pressing
the camera's ❸recording button 5 times or by using the APP.
Note: When using a new SD card, make sure to format it first or the camera might not be able to
detect the card (you will see the 2 lights are flashing alternately).
Format the SD card
1. By quick pressing the camera's button: stop recording first (you'll see the
green light remain on, it should not be flashing). Quick press the ❸recording
button 5 times and the camera will vibrate 5 times to format the card.