Techalogic XV-1 User Manual page 10

Use the APP via WIFI - Viidure
1. Download the 'Viidure' APP.
2. After turning on the camera, press the ❹WIFI button TWICE to turn on its WIFI. Once the
WIFI is on, the blue WIFI indicator light will flash.
Note: If the camera is not connected to the phone within 1 minute, the camera's WIFI will
automatically turn off. If the camera successfully connects to your phone, the camera's blue
WIFI indicator light will turn solid (not flashing).
3. Go to your phone's setting page
connect to it. The camera's WIFI name is XV-1+SSID NO. and the password is 12345678
Note. Please DON'T change the WIFI name nor the password to avoid connection errors.
4. Once the camera's WIFI is connected to your phone's WIFI, open the Viidure APP and follow
the on screen instructions to add the camera to the APP.
5. If successful, you'll see the camera in the Viidure app. Click ACCESS CAMERA, you can
now use the app to control the camera, start / stop recording, take photos, view and
download your videos, and more.
6. When the camera is connected to the APP (blue light is ON solid), all operation (such as start
/ stop recording) should be done through the APP because the key button on the camera will
be disabled.
7. To change the camera's settings, go to the APP then press the Settings icon
Note: The camera will STOP recording when you're in the setting page (the green light is on,
but NOT flashing). Remember to go back to the main page, so the camera can continue
recording (indicated by the flashing green light).
, click the camera's WIFI and enter the password to
.