Auto Power Off Function; Volume Limiter Function - Yamaha Arius YDP-105 Owner's Manual

The power lamp lights up.
NOTICE
Press only the [P] (Standby/On) switch when turning the
power on. Any other operations, such as pressing the keys,
buttons or pedals may cause the instrument to malfunction.
4.
Press the [P] (Standby/On) switch again
for 1 second to turn off the power.
The power lamp turns off.
CAUTION
Even when the [P] (Standby/On) switch is in the standby
status, electricity is still flowing to the instrument at a
minimum level. When not using the instrument for an
extended period of time, be sure to unplug the power cord
from the wall AC outlet.

Auto Power Off Function

To prevent unnecessary power consumption, this
function automatically turns the power off if the
instrument is not operated for 30 minutes.
Default setting:
Enabled
Disabling Auto Power Off (simple method)
While holding down the A−1 key (the lowest key),
press the [P] (Standby/On) switch to turn the
instrument on.
Lowest key
To re-enable the Auto Power Off function, see
page 12 ( ).
2

Volume Limiter Function

3
When this function is on, the Master Volume does
not increase even when the [MASTER VOLUME]
knob is turned to the right from center. This allows
2
you to protect your hearing when using the
headphones or prevent loud sound from coming
out of the speakers.
To turn on this function, see page 13 (
Setting Up
).
*
Maximum Volume (Center)
The Master Volume does not
increase even when the
[MASTER VOLUME] knob is
turned to the right from center.
YDP-105 Owner's Manual
11