Advertisement
B
PORNIREA
Porniti instrumentul comutand surubul
ON/OFF in pozitia ON. Aparatul este
pregatit pentru utilizare. (tastatura este
luminata). O alarma vizuala ( laserul
palpaie) si sonora indica faptul ca
instrumentul este in afara intervalului de
autonivelare. Asezati aparatul pe o
suprafata mai dreapta.
Pentru inchidere instrument, rotiti de
surubul ON/OF in pozitia OFF.
Instrumentul este inchis acum, iar pendulul
compensator este blocat. pentru un
transport mai sigur.
NOTA: Pe timpul transportului, surubul
ON/OFF ( blocare compensator) trebuie sa
fie in pozitia OFF.
Altfel, se poate defecta sistemul de
compensare.
6
Selection PRO
SWITCH ON
Switch instrument on by turning ON/
OFF knob in position ON. Instrument is
now ready for use (keypad is illumi-
nated). An audible and optical (blinking
lines) alarm indicates if the instrument
was set up outside of compensator
range. In this case set up instrument
on a more even surface.
To switch instrument off turn ON/
OFF knob back to OFF position.
Instrument is now switched off and
the compensator is blocked to avoid
damages during transport.
NOTE: During transport ON/OFF knob
(compensator lock) must be set to
OFF. Disregard may lead to damages
of the compensator.
Advertisement
