RidgeLine 97006 Manual page 47

Part To do
Spark check
plug
Spark clean
plug
Spark replace
plug
Air filter check
Air filter clean
Air filter replace
Saw check
chain
Saw lubricate
chain
Saw clean
chain
Saw replace
chain
3. Sprocket wheel
NOTE: It is not necessary to remove the saw chain (7) to lubricate
the sprocket. Lubrication can be done on the job.
1. Clean the sprocket wheel (8b).
2. Using a disposable lube gun, insert the needle nose into the lubrication hole
(8a) and inject grease until it appears at the outside edge of the sprocket (Fig.
43).
For Customer Service:
Please call 877-713-3189 (Toll Free), or email: Support@fot-usa.com
Before/after 10
each use hours
x
x
x
x
47
25
hours
x
x
whenever necessary
x
whenever necessary
whenever necessary
50 100
hours / hours /
half once a
year year