Table of Contents
Advertisement
2.
Pull the front hand guard (6) back toward the front handle (5) to disengage
the chain break, if necessary.
3.
Loosen the retaining nuts (9) with the multi tool (31) and remove them
together with the cover (11) (Fig. 1).
11
Fig. 1
4.
Place the slot in the guide bar (8) over the bolts (13). Ensure to fit the guide
bar with the saw chain 'cutter' symbol at the top of the bar (Fig. 2).
Fig. 2
5.
Push the guide bar (8) to the left towards the drive sprocket (18) (behind the
clutch (17)) (Fig. 3).
For Customer Service:
Please call 877-713-3189 (Toll Free), or email: Support@fot-usa.com
6
13
6
9
31
8
23
Advertisement
Table of Contents
