Introduction - Orientalmotor astep AR Series User Manual

Introduction

4 Introduction
„ Before use
Only qualified personnel should work with the product.
Use the product correctly after thoroughly reading the section "1 Safety precautions" on page.3.
The product described in this manual has been designed and manufactured for use in general industrial equipment.
Do not use for any other purpose. Oriental Motor Co., Ltd. is not responsible for any damage caused through failure
to observe this warning.
„ Operating Manuals for the AR Series
Operating manuals for the AR Series are listed below.
The "USER MANUAL" does not come with the product. For details, contact your nearest Oriental Motor sales office
or download from Oriental Motor website download page.
After reading the above manuals, keep them in a convenient place so that you can reference them at any time.
Applicable product
AR Series
DC power input
Pulse input type
Data setter OPX-2A
Data setting software
MEXE02
With regard to the information required to be certified under the UL Standard, refer to the "APPENDIX UL Standards
for AR Series DC power input type" (the paper is supplied with the product).
„ CE Marking
• Low Voltage Directives
Because the input power supply voltage of this product is 24 VDC/48 VDC, it is not subject to the Low Voltage
Directive but install and connect this product as follows.
• This product is designed and manufactured to be installed within another device. Install the product in an enclosure.
• For the driver power supply, use a DC power supply with reinforced insulation on its primary and secondary sides.
• EMC Directive
This product has received EMC compliance under the conditions specified in "Example of motor and driver
installation and wiring" on page.20.
Since the compliance of the final machinery with the EMC Directive will depend on such factors as the configuration,
wiring, layout and risk involved in the control-system equipment and electrical parts, it therefore must be verified
through EMC measures by the customer of the machinery.
Applicable standards
EN 61000-6-4, EN 61800-3
EMI
EN 55011 group 1 class A
EMS EN 61000-6-2, EN 61800-3
„ Hazardous substances
The products do not contain the substances exceeding the restriction values of RoHS Directive (2011/65/EU).
−8−
Type of operating manual
Motor OPERATING MANUAL
(Supplied with motor)
Driver OPERATING MANUAL
(Supplied with driver)
USER MANUAL
OPERATING MANUAL
OPERATING MANUAL
Description of operating manual
This manual explains the functions as well as the
installation method and others for the motor.
This manual explains the functions as well as the
installation method and others for the driver.
This manual explains the function, installation and
connection of the motor and driver as well as operating
method.
This manual explains how to set data using the
accessory OPX-2A (sold separately).
This manual explains how to set data using the
accessory MEXE02.