Fast Moving Detection - HIKVISION iDS-7700NXI-I4/16P/16S Series User Manual

Note
Up to 4 areas are selectable.
2) Click Draw Area to draw a quadrilateral in the preview window by specifying four vertices of
the area.
3) Set Percentage.
Percentage
The density of human bodies within the area. If it exceeds the threshold value, the device
will trigger alarm.
7. Set the arming schedule. Refer to Configure Arming Schedule .
8. Set the linkage actions. Refer to Configure Linkage Actions .
9. Click Apply.

6.2.6 Fast Moving Detection

Fast moving detection is used to detect suspicious running and chasing, over-speed, and fast
moving. It will trigger alarm when an object is moving fast and send notification to arming host so
that necessary actions can be taken in advance.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events .
2. Select a camera.
3. Click Fast Moving.
4. Check Enable Fast Moving.
5. Optional: Check Save VCA Picture to save the captured fast moving detection pictures.
6. Set fast moving detection parameters.
1) Select Arming Region. Up to 4 regions are selectable.
Network Video Recorder User Manual
Figure 6-6 Fast Moving Detection
66