Table of Contents
Advertisement
Available languages
Available languages
EN
Product Overview
Product Overview
Thank you for using Bormann hand-held laser
distance meter, please read the instruction carefully
before operation.
This product is a hand-held laser distance meter with
super high ingress protection.
Main features:
IP65 waterproof, drop-resistance and super long
lifespan.
2- inch HD white- on-black display, which is easier for
users to read at any time of the day or night.
Works with rechargeable NI-MH batteries, which
makes it more environment friendly and has longer
life.
Integrated electronic tilt sensor, making it easier
to achieve horizontal alignment with the real-time
measuring angle.
Comprehensive measuring functions of Area,
Volume, Pythagoras, Auto Level, Auto Height.
Appearance
1. Measure Button
Activate the measuring mode, short press to
measure, long press to Continuous measurement.
2. Menu Button
Press to change measuring mode: Area/ Volume/
Pythagoras/Auto Level/Auto Height.
2
3. Measuring Reference/Unit Button
The Rear is the default Reference.
Short press to change the Reference (Front/Tripod/
Rear) , Long press to change the measuring units (m/
ft/in/ft+in).
4. Laser Emitter Icon
5. Display Screen
Mode selection display
6. Memory Button
Press to recall memory values.
7. Add(+) / Subtract(-) Button
Under the mode of Distance, Area and Volume
measurement, short press to add values, long press
to subtract.
8. Mute Button
Press to De-/activate the Beep.
9.ON/OFF/Clear/Return Button
Long press to switch ON/OFF, short press to clear the
previous operations or return to main menu.
10. Battery Compartment
11. Tripod Screw Hole
Display Screen
1. Battery status
2. Distance /Continuous measurement
3. Laser on
4. Reference (Front}
5. Reference (Tripod)
6. Reference (Rear)
7. Measuring mode indication
8. Angle indicator
9. Historical values
10. Value 1
11. Value 2 / Min value
Safety Instructions
The safety instructions should be read through
carefully before the product is used for the first time.
Warning! A. The device is categorized into Class 2
laser product. DO NOT stare at laser directly or shoot
at others or it will cause damage to eyes.
B. The product Is In accordance with strict standards
and regulations through the development and
manufacturing, but still can't entirely exclude the
possibility of Interference to other devices, may cause
discomfort to human and animals.
• Please DO NOT use this product under explosive or
corrosive environment.
• Please DO NOT use this product near medical
devices.
Please DO NOT use this product on the plane.
Disposal
Everyone is responsible for environmental protection.
It's prohibited to dispose used batteries together with
household waste, please collect used batteries to
designated waste station.
This product must not be recycled with household
waste. Dispose of the product appropriately in
WWW.BORMANNTOOLS.COM
accordance with the national regulations in your
country.
Scope of Responsibility
The manufacturer will not be responsible for the
damages caused by improper use below: *Using
the product without Instruction: use of accessories
from other manufacturers without approval from
Bormann.
*Carrying out modifications or conversions of the
product.
Battery Installation and Instructions
Press and slide the cover toward the rear of the body
to open the battery door.
Insert 3* AAA rechargeable NI-MH batteries,
observing correct polarity.
After the battery is placed, cover and hold the battery
door, press and slide to the top, the cover can be
sealed.
The product uses rechargeable NI-MH batteries*.
Please use provided USB cable* while charging. The
computer can also be used to charge, but this takes
more time
Warning:
When use dry batteries, please DO NOT use USB
to charge. DO NOT mix rechargeable batteries with
dry batteries at the same time to avoid accidents.
Any damage caused by Improper use of charging
dry battery Is not covered by the warranty, the
manufacturer not be responsible for It.
* Not available on all models.
Advertisement
Table of Contents
