Names And Functions Of Parts; Main Unit - Kenwood VR-8050 Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
L
SL S
Input channel indicators
Output channel indicators
POWER
STANDBY
ON/STANDBY
A SPEAKERS B
PHONES
1 POWER ON/STANDBY
Use to turn the power ON/STANDBY.
STANDBY indicator
2 A SPEAKERS B keys
Use to turn the A/B speakers on or off.
3 ACTIVE EQ key
Use to select ACTIVE EQ's setting.
4 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
5 Surround LED (lighting-emitting diode)
indicators
DSP mode LED indicator
Lights when the receiver is in the DSP mode.
SPEAKER EQ mode LED indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode LED indicator
Lights when the receiver is in the Dolby
Digital mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
LOUDNESS LED indicator
Lights when the LOUDNESS is ON.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
6
EN
MUTE CLIP Input mode
indicator indicator indicators
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
C SW R
LFE
SB SR
DSP DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ LOUDNESS
ACTIVE EQ SPEAKER EQ LOUDNESS DSP STEREO INPUT MODE
DVD/6CH CD/DVD PHONO TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
6 LOUDNESS key
&
key
Use to switch the status of LOUDNESS.
7 DSP key
Use to select any of the DSP mode.
)
8 STEREO key
Use to switch the listen mode to STEREO.
¡
9 INPUT MODE key
Use to switch between the full auto, digital
¡
and analog inputs.
0 DIMMER key
Use to select the REC MODE.
Use to adjust the brightness of the display.
ª
! VOLUME CONTROL knob
™
@ MUTE key
Use to temporarily mute the sound.
# PHONES jack
™
Use for headphone listening.
$ Input Selector keys
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
ª
Use to select input sources.
% SOUND key
Use to adjust the sound quality and the
ª
ambience effects.
^ BAND key
¡
Use to select the broadcast band.
Listen mode
indicators
DTS DOLBY DIGITAL
AUTO DETECT
MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
Frequency display
Input display
Preset channel display
Display
Surround mode display
DIMMER
MULTI CONTROL
SOUND TONE SETUP
BAND AUTO MEMORY
STEREO NEO:6
AUTO
MEMORY
STEREO
TUNED
VOLUME CONTROL
DOWN
MUTE
LISTEN MODE
AV AUX
S VIDEO VIDEO
& AUTO key
¡
Use to select the auto or manual tuning
•
mode.
* TONE key
º
Use to switch the status of TONE control.
( MEMORY key
8
Use to store radio stations in the preset
memory.
) SETUP key
Use to select the speakers' settings etc.
¡
£
keys
Use for selection adjustments during sound,
º
set up and preset channel functions.
™ MULTI CONTROL knob
)
¡
Use to control a variety of settings.
£ LISTEN MODE knob
™
Use to select the listening mode.
¢ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
)
jacks
∞ AV AUX key
Use to switch the input to AV AUX.
º
¢
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
UP
L-AUDIO-R
¢
¡
¢
&
&
&
•
^
^