Kenwood VR-8050 Instruction Manual page 19

Preparing for surround sound
Distance to Surround Back Left (SBL) : ____ feet (meters)
Distance to Surround Left (SL)
Distance to Subwoofer (SW)
• If you have selected "SB/SW AMP SB", "SBR" and "SBL" are
not appeared but "SB" is appeared on the Display.
3 Use the ∧ ∧ ∧ ∧ ∧ / ∨ ∨ ∨ ∨ ∨ keys or @/# keys to select the speakers and the
MULTI CONTROL knob or Multi (%/fi) keys to adjust the
distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
Indication in feet
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
7
Adjust the LFE LEVEL (Low Frequency Effects).
1 Select the LFE LEVEL from the setup displays and press the
SETUP key again.
2 Use the the MULTI CONTROL knob or Multi (%/fi) keys to
adjust the LFE LEVEL.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L R
LFE
SL S SB SR
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the SETUP key again to return to main setup displays.
8
Select the display mode.
1 Press the ∧ ∧ ∧ ∧ ∧ / ∨ ∨ ∨ ∨ ∨ key or @/# keys to select the DISP MODE.
2 Press the SETUP key for the following displays:
1 DISP SELECTOR
2 DISP LISTEN
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the display mode.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L R
LFE
SL S SB SR
4 Press the SETUP key again to accept the setting.
5 Use the ∧ ∧ ∧ ∧ ∧ key or # key to select EXIT.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L R
LFE
SL S SB SR
6 Press the SETUP key to exit the SET UP mode.
: ____ feet (meters)
: ____ feet (meters)
CINEMA EQ. DTS. DOLBY DIGITAL NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Indication in meters
CINEMA EQ. DTS. DOLBY DIGITAL NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC PRO LOGIC CSII
: Displays the current input selector.
: Displays the current listen mode.
DOLBY DIGITAL
CINEMA EQ. DTS. NEO:6
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC CSII
CINEMA EQ. DTS. DOLBY DIGITAL NEO:6
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC PRO LOGIC CSII
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
1 Use the Input Selector keys to select the source of which the
input level you want to adjust.
• You can store a separate input level for each input source.
RDS
RTY
AUTO
MEMO 2 Press the SOUND and ∧ ∧ ∧ ∧ ∧ / ∨ ∨ ∨ ∨ ∨ keys or @/# keys repeatedly until
STEREO
TUNED
the "INPUT" indication appears.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
input level.
A B
L C R
LFE
SL S SB SR
• The adjustment mode is displayed for approximately 20 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
4 Press the SOUND key again to return to the input indication.
RDS
RTY
AUTO
MEMO
STEREO
TUNED
RDS
THX
RTY
AUTO
MEMO
STEREO
TUNED
RDS
THX
RTY
AUTO
MEMO
STEREO
TUNED
SP MUTE OPTICAL 6CH INPUT
A B CLIP CLIP CLIP
COAXIAL ANALOG
L C R
LFE
SL S SB SR
SP MUTE OPTICAL 6CH INPUT CINEMA EQ. DTS. DOLBY DIGITAL
AUTO DETECT
ACTIVE EQ. MATRIX
CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC PRO LOGIC
CINEM
AUTO DETECT
ACTIV
96kHzfs DSP M
RDS
NEO:6
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
19
EN