Recording; Recording Audio (Analog Sources); Recording Video; Recording Audio (Digital Sources) - Kenwood VR-8050 Instruction Manual

Recording

Recording audio (analog sources)

MD/TAPE
Recording a music source
1 Use the Input Selector keys to select the source (other than "MD/
TAPE") you want to record.
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.

Recording video

1 Use the Input selector keys to select the video source (other than
"VIDEO 1") you want to record.
2 Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due
to the copy guard condition.

Recording audio (digital sources)

Switch on the REC MODE to record a digital input source.
Usually use the REC MODE AUTO to record audio input sources. When
the digital mode changes during recording in the REC MODE AUTO, the
audio input source may be interrupted momentarily.
Recording music in REC MODE AUTO or MANUAL
DIMMER
Input Selector
1 Use the Input Selector keys to select the source (CD/DVD,
DVD/6CH, VIDEO 2, VIDEO 3) you want to record.
2 Set the MD or TAPE recorder to record.
3 Press and hold the DIMMER key for more than 2 seconds to
select the REC MODE AUTO or MANUAL.
1 REC MODE off
2 REC MODE AUTO
3 REC MODE MANUAL : The input signal type at the moment
• When the REC MODE MANUAL is selected, the digital input signal
is converted to stereo signals (down-mix). But once the digital signal
is changed to other signal, no signal is output.
When the REC MODE AUTO is selected, the digital input signal is
converted to stereo signals even if the digital signal is changed.
For REC MODE AUTO :
SP MUTE
A B CLIP
L C R
LFE
SL S SB SR
SP MUTE
A B CLIP
L C R
LFE
SL S SB SR
w
For REC MODE MANUAL :
SP MUTE
A B CLIP
L C R
LFE
SL S SB SR
SP MUTE
A B CLIP
L C R
LFE
SL S SB SR
4 Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
: The digital input record mode is
switched off.
: The digital input signals (DTS, Dolby
Digital, or PCM) are identified auto-
matically and converted into stereo
signals that are ready for recording.
this mode is selected is held through-
out this mode.
CINEMA EQ. DTS. DOLBY DIGITAL STEREO
OPTICAL 6CH INPUT
AUTO DETECT
ACTIVE EQ. MATRIX
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
CINEMA EQ. DTS. DOLBY DIGITAL STEREO
OPTICAL 6CH INPUT
AUTO DETECT
ACTIVE EQ. MATRIX
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
OPTICAL 6CH INPUT CINEMA EQ. DTS. DOLBY DIGITAL STEREO
AUTO DETECT
ACTIVE EQ. MATRIX
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
OPTICAL 6CH INPUT CINEMA EQ. DTS. DOLBY DIGITAL STEREO
AUTO DETECT
ACTIVE EQ. MATRIX
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
NEO:6 RDS
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
NEO:6 RDS
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
NEO:6 RDS
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
NEO:6 RDS
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
23
EN