Recording; Recording Audio (Analog Sources); Recording Audio (Digital Sources); Recording Video - Kenwood KRF-V8090D Instruction Manual

Hide thumbs Also See for KRF-V8090D:
Table of Contents

Advertisement

Recording

Recording audio (analog sources)

Input Selector
keys
Recording a music source
1 Use the INPUT SELECTOR key or the Input Selector keys to select
the source (other than "MD/TAPE") you want to record.
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.

Recording audio (digital sources)

DIMMER
Input Selector
keys
Recording music in REC MODE AUTO or MANUAL
1 Use the INPUT SELECTOR key or the Input Selector keys to select
2 Set the MD or TAPE recorder to record.
3 Press and hold the DIMMER key for more than 2 seconds for the
INPUT
SELECTOR
INPUT
SELECTOR
4 Start playback, then start recording.

Recording video

1 Use the INPUT SELECTOR key or the Input selector keys to select
2 Set the video recorder connected to VIDEO 1 to record.
3 Start playback, then start recording.
the source (CD/DVD, DVD/6CH, VIDEO 2, VIDEO 3) you want to
record.
following selections;
1 REC MODE off
2 REC MODE AUTO
: The digital input signals (DTS, Dolby Digi-
tal, or PCM) are identified automatically
and converted into stereo signals that
are ready for recording.
3 REC MODE MANUAL : The digital input signals (DTS, Dolby Digi-
tal, or PCM) are identified and converted
into stereo signals that are ready for
recording.
Once the digital signal is changed to
other signal, no signal is output.
For REC MODE AUTO :
SP
MUTE
DIGITAL
AUTO DETECT
A B
CLIP
L
C
R
LFE
SL
S
SB
SR
SP
MUTE
AUTO DETECT
DIGITAL
A B
CLIP
L
C
R
LFE
SL
S
SB
SR
For REC MODE MANUAL :
SP
MUTE
DIGITAL
A B
CLIP
L
C
R
LFE
SL S
SB
SR
SP
MUTE
DIGITAL
A B
CLIP
L
C
R
LFE
SL S
SB
SR
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
the video source (other than "VIDEO 1") you want to record.
• Select the REC MODE to record a digital input source.
• Recording may not be normal for some video software. This is due
to the copy guard condition.
STEREO
STEREO
STEREO
STEREO
I
27
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents