Page 1
Installation www.brondell.com or call us toll water supply free: 1-888-542-3355 (not included) installation T-valve fitting (available in ½” or ” ) Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com...
Page 2
Between the elbow and the gray plug is a thin white collar. Using the Quick Connect tool, push down on the ring toward the elbow At the same time, pull the gray plug out in the opposite direction. Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com...
Page 3
This will go away over time as the air is flushed out of the system. Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com...
Page 4
Tool as needed Tips 3. First, turn on cold water supply line under sink at wall. Then, open the T-valve switch to supply main water. OPEN OPEN Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com...
Page 5
2. Press the button on top of the unit until a “CLICK” sound is heard. Once clicked, it will provide continuous water flow. 3. To stop the water flow, press the button again to return it to the initial position “CLICK” Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com...
Page 6
TROUBLESHOOTING In most cases, problems with your Brondell H2O+ water filtration system can be resolved with a little troubleshooting by checking each of the items below. If you cannot resolve the problem you are having after troubleshooting, please call Brondell customer service toll free: 888-542-3355 or email us at support@brondell.com...
Need help?
Do you have a question about the H630 and is the answer not in the manual?
Questions and answers