Totem KIN PlayTower Owner's Manual page 9

1. AMP IN
This input bypasses the internal preamplifier to facilitate connecting external
streaming components.
2. Aux 1
You can connect this analog input to the analog output of your TV, cable box, satel-
lite, game, turntable, or whatever device you'd like to connect.
3. Aux 2
This 3.5mm input can be used with many portable devices and computers.
4. Sub out
This allows you to connect a Totem Acoustic powered sub woofer to your speaker
to add thunderous bass and enhance the low frequency effect.
5. Digital In Optical 1 and 2
Sometimes referred to as Toslink or SPDIF, these digital inputs allows the use of an
optical wire from your TV, cable box, satellite, game, or whatever source you'd like
to connect.
6. Phono/Line
For all modern electronics this should be left in the "Line" position. When connect-
ing a turntable equipped only with a Phono output, set this to Phono.
7. Ground
This is used only with turntables equipped with a ground cable.
8. Right Speaker Output
Connect the supplied speaker wire from here to the right speaker's input. Be sure to
maintain the polarity of the wire, keeping the positive and negative signals consis-
tent to ensure best performance.
9. Power
This will turn the speaker on and off. Make sure to make all your connections be-
fore turning the speaker on. You only need to turn this switch on once, it will then
go into standby mode when it is not in use.
10. Voltage Selector
This selector can be manually switched between 115v and 230v, based on the volt-
age of where you live. The KIN PLAY will be set to the country's voltage where it is
sold. DO NOT CHANGE THE SETTING OR YOU WILL DAMAGE THE SPEAKERS!
11. AC Input
The supplied power cord connects here, plug the other side into a wall receptacle
or power bar.