Page 2
We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
Page 3
Meticulously crafted for peak performance that lasts decades. Designed obsolescence is rampant in consumer electronics, we favour longevity. • Aesthetics must be timeless and not trendy. Totem speakers never goes out of style. ALL TOTEM SPEAKERS ARE DEVELOPED WITH THESE 4 DESIGN CHARACTERISTICS: 1-Proprietary scientific formulas are the foundation for the essence of Totem, eschewing outdated design guidelines and parameters.
Page 4
This ensures no damage during transportation. All Totem products are created with the utmost care and quality in mind. If ever a problem should arise, Totem’s passive speakers are covered by a five (5) year limited warranty, (excluding subwoofers and powered speakers) starting from the date of purchase.
Page 5
When used as a center channel, position the tweeter towards the top when positioned at ear level or below (FIG 1). When positioned above the listening area, orient the KIN Solo so the tweeter is facing downwards (FIG 2).
Page 6
WALL MOUNTING The KIN Solo can conveniently be wall mounted horizontally or vertically with the supplied bracket and hardware. The flat surface of the bracket faces the wall, and the bolt protrusions face the speaker. 1. Affix the four rubber feet to the back corners of the speakers.
Page 7
DECOUPLING If the KIN Solo is placed on a surface, Totem recommends decoupling the loudspeaker with the supplied feet to break down cabinet resonance for optimum results. Turn the speaker upside down and apply the adhesive backed feet to the 4 corners and middle of the cabinet.
Page 8
We sincerely hope you enjoy your Totem speakers and greatly appreciate your patronage. New products are consistently being developed so be sure to periodically visit your authorized Totem dealer or our website to keep informed on everything Totem has to offer.
Need help?
Do you have a question about the KIN Solo and is the answer not in the manual?
Questions and answers