Related Manuals for Totem MASK4
Summary of Contents for Totem MASK4
- Page 1 HIGH PERFORMANCE HOLOGRAPHIC ARCHITECTURAL LOUDSPEAKER SERIES MASK 4, 6.5 & 8 OWNERS MANUAL / INSTALLATION...
- Page 2 We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
-
Page 3: Totem Limited Warranty
Keep your original bill or receipt obtained from your Totem Authorized Dealer. All Totem products are created with the utmost care and quality in mind. If ever a problem should arise, Totem’s speaker are covered by a five (5) year limited warranty, (excluding subwoofers) starting from the date of purchase. -
Page 4: User Manual
MASK IN-CEILING 4, 6.5 AND 8 MASK STEREO 6.5 Thank you for choosing the Totem Acoustic MASK Architectural series. Please take the time to fully read this manual prior to beginning set-up. The manual will clearly guide you to achieve the best possible sound that these newly acquired Totem speakers are capable of providing. -
Page 5: Product Features / Specifications
• Solid twin-pair gold-plated terminals • Black polypropylene cone woofer with a rubber surround • Totem’s superior on-and off-axis performance • Pivoting soft dome with neodymium magnet and Ferrofluid™ cooled voice coil MASK IN-WALL 6.5 MASK IN-WALL 8 MASK STEREO 6.5... -
Page 6: Speaker Positioning
When placing your speakers in the ceiling, they should ideally be located above the primary listening area. In a room with low ceilings, it may be necessary to place additional speakers throughout the room to get the desired spaciousness. Contact your Totem Authorized Dealer for assistance. PLACEMENT IN WALL When placing your speakers in the wall, optimal sound will be achieved when your speakers are mounted at ear level or slightly above and the listening distance is no closer than the distance between the speakers themselves. -
Page 7: Installation Instructions
The scrim cloth backing must be removed prior to painting the grills. The surface should be cleaned with a light solvent to remove any dust or residue. Totem Acoustic recommends a light spray-painting using 5 parts thinning agent to 1-part paint. Do not paint the grills while they are attached to the speaker. - Page 8 (-) output terminal on the amplifier. The speakers will sound out of phase (bass loss and image distortion) if there is an error in your connection. Totem speakers can be bi-amped and bi-wired, please consult your amplifier manual for detailed instructions or contact your Totem Authorized Dealer.
-
Page 9: Troubleshooting Guide
ENVIRONMENTAL INFORMATION All Totem products are designed to comply with international Restriction of Hazardous Substances (RoHS) and CARB certification.
Need help?
Do you have a question about the MASK4 and is the answer not in the manual?
Questions and answers