Table of Contents
Advertisement
FRONT
CONTROLS
1.
LED Indicator
This is the round window on the front bottom left of the active speaker. It
captures the signal from the remote, indicates power status, and which source
has been selected with different color LEDs. The light will disappear roughly a
minute after the last feature was activated.
Bluetooth Connected = Solid Blue
Bluetooth Disconnected / Pairing Mode=Flickering Blue
When the other sources (Optical, RCA, 3.5mm), volume, or bass/treble is
changed, the green LED flashes once.
1
2.
Multi Control
Located on the bottom right of the active speaker, this multipurpose control
can be used for adjusting volume, Bluetooth pairing, and changing input. It
can be turned to the right to increase the volume, left to lower the volume. A
short push on the control activates the input select function and allows you to
scroll through the sources. A long push on the control activates the Bluetooth
pairing function, and the blue light in the LED Indicator will flash indicating
you are in pairing mode.
STANDBY = RED
POWER ON = GREEN
MUTE = FLICKERING RED
Controls on Active Speaker
2
Advertisement
Table of Contents
