Connecting Wires To Terminals - Kenwood KRC-265 Instruction Manual

Connecting Wires to Terminals

If no connections are made, do not let
the wire come out from the tab.
5 When using the optional power amplifier,
connect to its power control terminal.
7 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type
Ignition key
switch
10
Car fuse box
(Main fuse)
11
Battery 12
4
P.CONT Power control wire (Blue/White)
ANT
Motor antenna control wire (Blue)
CONT
antenna.
ACC 13
Ignition wire (Red)
Car fuse
box 14
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
KENWOOD disc changer control
To connect the Disc changer,
consult your Disc changer
manual. 3
Fuse (10A) 24
Wiring harness
(Accessory1)25
20
21
22
— 15 —
input2
Rear left output (White)
Rear right output (Red)
FM/AM antenna input
29
White/Black
To front left
speaker
White
31
32
Gray/Black
To front right
speaker
Gray
34
35
Green/Black
To rear left
speaker
Green
37
38
Purple/Black
To rear right
speaker
Purple
40
23
28
1
30
33
36
39