Connector View; Tools Needed - Garmin GPSMAP 8700 Installation Instructions Manual

Connector View

POWER Power cable connection
NETWORK Garmin Marine Network
HDMI IN HDMI ® in
HDMI OUT HDMI out to connect the chartplotter to a monitor. Required for device functionality.
CVBS IN Composite video in
Status LED
Power ground
Power button
NMEA 0183 NMEA 0183 and audio out
®
USB HOST Micro-USB output for connecting a touchscreen monitor
Micro-USB input from compatible Garmin card reader
USB OTG
accessory
NMEA 2000 NMEA 2000
J1939 J1939 network

Tools Needed

• Drill
• Drill bits appropriate for the surface and hardware (3.2 mm (
• Phillips screwdriver
• Pencil
1
Only compatible Garmin card readers recommended. Third-party card readers are not guaranteed to be fully compatible.
2
network
®
1
, computer, or other supported USB
1
/ in.) drill bit for included screws)
8